Pro Shot Alpha-v Vertical Plumb Highrise Laser Level

SKU: 0020-0020-LV2
The Pro Shot Alpha-V is used for alignment plumbing through extended heights. This is particularly useful for the builder or surveyor when working with heights that are inaccessible or too large to plumb with string lines. The Pro Shot Alpha-V is also used for construction of vertical shafts and similar structures like massive vertical cable ducts or elevator paths.
- Beam diameter leaving laser 3/8".380 inch
- Beam diameter at 100m (330') 7/16" .440 inch
- Range to 100m, 330 feet
- Height 6.5" weight 4.0 lbs
- 24 mo. Warranty coverage
- Out of Level indication, after self leveling, if the laser got bumped light will flash
Recommended alternative is the Laserline Quad 1000 Precision Zenith Plumb Laser.
or FOIT Laser/optical plummet
-
Description
The Pro Shot Alpha-v is used for vertical alignment plumbing through extended heights. This is particularly useful for the builder or surveyor when working with heights that are inaccessible or too large to plumb with string lines. The Pro Shot Alpha-v is also used for construction of vertical shafts and similar structures like massive vertical cable ducts or elevator paths.
- Good for high rise construction, tunneling, towers or anywhere you need accurate precision vertical alignment.
- 5 second plumb up accuracy 5" seconds is 1/16" @ 100'.
- The Pro Shot Alpha-v offers the highest level of plumb up precision in its class: 5" seconds above and 1.5mm below.
- Since laser beams are directed both up and down, it is easy to locate points vertically from a given point on the ground.
- Application examples: tower work, high-rise work, elevator shaft, construction, vertical piping construction, vertical cable ducts, transfer of vertical survey points to ground, and ceiling work.
-
-
Specifications
Measurement range up
330' (100m)
Measurement range down
16' (5m)
Beam accuracy up
± 5 arc sec Beam accuracy down
± 1 arc min
Self-leveling range
± 4º, servo motor leveled Power supply
Four C-cells (alkaline)
Run time: down beam on
65 hrs (continuous)
Run time: down beam flashing 100 hrs (continuous) Automatic shut-off
If off-level for more than 3 min
Dust and water sealed
To international standard IP56
Operating temperature -4º F to +122º F (-20º C to +50º C) Storage temperature
-40º F to +140º F (-40º C to +60º C) Laser classification
CDRH Class 3A, IEC 825-1 Class 3R
Height; weight
6.5" (16.5cm); 4.0lbs (1.8kg)
- Downloads